Independent Shops for Mazak CNC Repair
This directory lists independent repair shops for Mazak spindles, MAZATROL control boards, drives, and ball screws. A listing shows the shop’s Mazak repair categories and the turnaround and warranty terms that the shop publishes.
Mazak developed its first NC lathe in 1968 and its MAZATROL T1 conversational CNC system for lathes in 1981. Later MAZATROL generations run from SmoothX in 2014 to SmoothAi in 2019. Independent board repair shops list Mazak Mazatrol controls next to Fanuc and Okuma controls. One spindle shop on this list repairs the Fanuc Alpha and Beta spindle motors common in Mazak machines and the Mitsubishi motors in some Mazak models.
Mazak Repair Shops
Accurate Machine Tool Services
Franklin, WI
Brands: DMG Mori, Fanuc, Haas, Mazak
Atlanta CNC Repair
Marietta, GA
Brands: DMG Mori, Fanuc, Haas, Makino, Mazak, Okuma
CNC Electronics West Inc
Chula Vista, CA
Brands: Fanuc, Mazak
Brands: Fanuc, Haas, Makino, Mazak, Okuma
Flexa Systems
Lewisville, TX
Brands: Fanuc, Haas, Mazak, Okuma
Global CNC Machine Services
Moraine, OH
Brands: Mazak
HS Spindles
Yorba Linda, CA
Brands: Mazak
Machine Tool Science
Gaffney, SC
Brands: DMG Mori, Fanuc, Haas, Mazak, Okuma
Motor City Spindle Repair
Dearborn, MI
Brands: DMG Mori, Fanuc, Haas, Makino, Mazak, Okuma
Setco
Hebron, KY
Brands: DMG Mori, Makino, Mazak, Okuma
Superior Spindle
Taylor, MI
Brands: DMG Mori, Makino, Mazak, Okuma
Compare Mazak Repair Shops
This table lists turnaround, warranty, and evaluation terms from each shop's published information.
| Shop | Repair type | Turnaround (business days) | Warranty (months) | Free evaluation | Rush service |
|---|---|---|---|---|---|
| CNC Electronics West Inc | Ship-in repair | 1 | Not listed | Not listed | Not listed |
| Flexa Systems | Ship-in repair | 1-3 | 24 | Yes | Yes |
| HS Spindles | Ship-in repair | 10-15 | Not listed | Not listed | Yes |
| Motor City Spindle Repair | Ship-in repair | 5-15 | 12 | Yes | Yes |
| Superior Spindle | Ship-in repair | 10-14 | Not listed | Not listed | Yes |
Mazak Repair by Component
This directory splits Mazak repair into separate pages by component. Each page explains the faults for one component and the checks to run ahead of a repair. The shop list on each page narrows the directory down to shops listed for that component.
Spindle Checks Mazak Lists
Mazak’s spindle rebuild brochure lists six maintenance tips for Mazak spindles. Runout gets checked every six months and after any crash with a ground and calibrated test bar. A drawbar pull force test checks spring force. Alarms from built-in vibration sensing systems call for attention because increased vibration points to worn bearings.
Lubricating fluid needs to stay clean and at safe levels. Large spindle headstocks are not factory lubricated for life and run their bearings in oil baths. Chiller units for spindle coolant need to run properly. Machine covers removed for maintenance go back on to keep contamination out of the spindle.
Using This Directory
Listing details come from information published by each shop or sent in by the shop owner. Shop owners can request a new listing or send a correction to an existing listing through the forms on this site. Each listing links to the shop’s own website and phone number for quotes and shipping instructions.
CNC Machine Pros does not perform repairs and takes no part in the quote, repair, or warranty between a shop and its customer. Each shop sets its own prices, turnaround, and warranty terms and handles its own repair work. Questions about a quote, a repair, or a warranty claim go straight to the shop handling the repair.